Contributions to atmospheric methane by natural seepages on the U.K. continental shelf [Mar. Geol. 137 (1997) 165–189]     

Alan Judd  Gareth Davies  Jason Wilson  Richard Holmes  Gordon Baron  Ian Bryden 《Marine Geology》1997,140(3-4):427-455

Natural gas seepages occur on the United Kingdom's continental shelf and although published reports suggest that they are very rare, the petroleum industry has identified, but not publicly reported, many more. There is also very little data on the flux of gas from seabed seepages, and even less on the contribution of seepages to atmospheric concentrations of gases such as methane.

Potential gas source rocks include Quaternary and Tertiary peats as well as petroliferous source rocks such as the Carboniferous Coal Measures and the Upper Jurassic Kimmeridge Clays. There are also other organic-rich sediments which are potential source rocks. Together these cover a considerable part of the U.K. continental shelf.

Analogue seismic reflection (pinger) profiles acquired during the British Geological Survey's regional mapping programme have been reviewed to identify water column targets including fish and plumes of gas bubbles. The ability to distinguish targets is critical to an assessment of the distribution of gas seepages. Both theoretical predictions of target identity and the habits of shoaling fish have been investigated in order to identify a method of distinction.

Data from seabed seepages and measurements of seepage rates have been used to establish likely ranges of gas flux rates and the sizes of gas bubbles. The likelihood that a rising bubble will survive and escape into the atmosphere is determined primarily by bubble size and water depth; methane, the principal constituent of seepage gas, is relatively unreactive and sparingly soluble.

The studies have enabled a new estimate of the distribution of gas seepages on the U.K. continental shelf, and of the contribution to atmospheric methane levels. The results suggest that natural gas seepages are significantly more important as a source of methane than had hitherto been established. It is estimated that between 120,000 and 3.5 mtonnes of methane per year come from a continental shelf area of about 600,000 km². This represents between 2% and 40% of the total United Kingdom methane emission. It is suggested that similar contributions arise from other continental shelf areas worldwide, and that geological sources of atmospheric methane are more significant than is generally acknowledged.  相似文献   

Helium resonance lines in the flare of 15 June, 1973     

Jason G. Porter  Katharine B. Gebbie  Laurence J. November 《Solar physics》1989,120(2):309-341

Time sequences of He i and He ii resonance line intensities at several sites within the flare of 15 June, 1973 are derived from observations obtained with the Naval Research Laboratory's Slitless Spectroheliograph on Skylab. The data are compared with predictions in six model flare atmospheres based on two values for the heating rate and three for the flux of photoionizing coronal X-rays and EUV. A peak ionizing flux more than 10³ times that in the quiet Sun is indicated. For most conditions in flare kernels the He ii L and L lines are found to be formed by collisional excitation, thereby contributing to the local cooling of the plasma at temperatures above 6 × 10⁴ K. Emission in the higher Lyman lines is generally the result of a mixture of collisional excitation at these temperatures and photoionization and recombination at temperatures near 2.5 × 10⁴ K. We discuss implications for the common practice of deriving stellar coronal fluxes from He ii 1640 Å fluxes assuming dominance of the recombination mechanism.Chief, Quantum Physics Division, National Institute of Standards and Technology.Operated jointly by the National Institute of Standards and Technology and the University of Colorado.Operated by the National Optical Astronomy Observatories of the Association of Universities for Research in Astronomy, Inc. under contract with the National Science Foundation.  相似文献   

Bringing GPS into harsh environments for fully automated deformation monitoring     

Jason Bond  Adam Chrzanowski  Don Kim 《GPS Solutions》2008,12(1):1-11

Engineering projects that require deformation monitoring frequently utilize geodetic sensors to measure displacements of target points located in the deformation zone. In situations where control stations and targets are separated by a kilometer or more, GPS can offer higher precision position updates at more frequent intervals than can normally be achieved using total station technology. For large-scale deformation projects requiring the highest precision, it is therefore advisable to use a combination of the two sensors. In response to the need for high precision, continuous GPS position updates in harsh deformation monitoring environments, a software has been developed that employs triple-differenced carrier-phase measurements in a delayed-state Kalman filter. Two data sets were analyzed to test the capabilities of the software. In the first test, a GPS antenna was displaced using a translation stage to mimic slow deformation. In the second test, data collected at a large open pit mine were processed. It was shown that the delayed-state Kalman filter developed could detect millimeter-level displacements of a GPS antenna. The actual precision attained depends upon the amount of process noise infused at each epoch to accommodate the antenna displacements. Higher process noise values result in quicker detection times, but at the same time increase the noise in the solutions. A slow, 25 mm displacement was detected within 30 min of the full displacement with sigma values in E, N and U of ±10 mm or better. The same displacement could also be detected in less than 5 h with sigma values in E, N and U of ±5 mm or better. The software works best for detecting long period deformations (e.g., 20 mm per day or less) for which sigma values of 1–2 mm are attained in all three solution components. It was also shown that the triple-differenced carrier-phase observation can be used to significantly reduce the effects of residual tropospheric delay that would normally plague double-differenced observations in harsh GPS environments.

Don KimEmail:

  相似文献   

Environmental Factors Contributing to the Development and Demise of a Toxic Dinoflagellate (<Emphasis Type="Italic">Karlodinium veneficum</Emphasis>) Bloom in a Shallow,Eutrophic, Lagoonal Estuary     

Nathan S. Hall  R. Wayne Litaker  Elizabeth Fensin  Jason E. Adolf  Holly A. Bowers  Allen R. Place  Hans W. Paerl 《Estuaries and Coasts》2008,31(2):402-418

A dense bloom of the ichthyotoxic dinoflagellate Karlodinium veneficum was discovered in the Neuse River Estuary, North Carolina, on 19 October 2006 and was associated with four subsequent fish kills. Microscopic, photopigment, DNA, and toxicological techniques confirmed bloom identity and toxicity. High-resolution spatio-temporal data from ship-board and fixed automated sampling stations provided a unique opportunity to investigate the environmental conditions that initiated, maintained, and terminated the K. veneficum bloom. Bloom initiation and growth were favored by high nutrient availability and reduced dispersal during the period of declining riverine discharge after Tropical Storm Ernesto. K. veneficum out-competed other co-occurring dinoflagellates, perhaps because of the production of karlotoxins that are known to act as grazing deterrents and to facilitate mixotrophic feeding. Once the bloom was established, small-scale hydrodynamic processes, coupled with vertical migration, concentrated cells along a frontal convergence to high densities (>200,000 cells per milliliter). By 26 October 2006, wind mixing and possible nutrient stress disrupted the bloom. Release of cell-bound toxins during the bloom collapse likely accounted for the associated fish kill events where fish were reported as exhibiting typical symptoms of karlotoxin poisoning. The dynamics of this bloom underscore the tight control of harmful algal blooms by meteorological forcing, hydrology, and sediment nutrient input in this shallow lagoonal estuary.  相似文献   

印度板块和亚洲大陆在何时何地碰撞   总被引：1，自引：0，他引：1  

Jonathan C Aitchison  Jason R Ali  Aileen M Davis 《地质通报》2008,27(9)

印度板块和亚洲大陆的初始碰撞时间是所有相关的喜马拉雅-西藏造山体系演化模式的主控条件,并严重影响到对众多与青藏高原隆升和东亚大陆挤出相关的地质过程速率的解释,以及对新生代全球气候变化的理解。尽管印度板块和亚洲大陆汇聚的速率在55Ma突然减缓被广泛地认为是初始碰撞的标志,但这次碰撞所造成的主要构造效应直到20多个百万年以后才显现出来。对印度板块和亚洲大陆相对位置的重新估算,表明它们在55Ma时并没有达到可以彼此发生碰撞的距离。基于来自西藏新的野外证据和对已有数据的重新评估,认为初始碰撞发生在始新世—渐新世之交（约34Ma）,并对55Ma时发生的地质事件提出了另一种解释  相似文献   

Nd,Sr, and Pb isotopic characteristics of Cretaceous intrusive rocks from deep levels of the Sierra Nevada batholith,Tehachapi Mountains,California   总被引：6，自引：0，他引：6  

David A. Pickett  Jason B. Saleeby 《Contributions to Mineralogy and Petrology》1994,118(2):198-215

The Cretaceous gabbroic to granitic intrusive rocks of the Tehachapi Mountains were emplaced at depths of 25–30 km and thus afford a view of deep processes in the Sierra Nevada batholith. They consist of the 115 Ma Tehachapi suite and the 100 Ma Bear Valley suite; new zircon U-Pb age data reveal the presence of the latter as far west as Grapevine Canyon. The Nd, Sr, Pb, and O isotopic whole-rock data and zircon Pb inheritance patterns for the bulk of the suites suggest an origin by mixing between depleted mantlederived magmas and metasedimentary material with a substantial component of old continental material. However, this mixing is not evident in variations between isotopic ratios and chemical and lithologic parameters. This implies that isotopic hybridization of magmas took place deeper than 30 km, and that fractionation processes are likely responsible for the bulk of the chemical variation in this part of the Sierra Nevada batholith. Consideration of the isotopic data in the context of the Sierra Nevada batholith as a whole suggests that the well-known east-to-west isotopic gradients in the batholith may reflect a change in the average isotopic character of the preintrusive frame-work rather than a change in amount of crustal component. On the other hand, the lack of areal gradients in Sr and Nd isotopic ratios in the main study area may indicate a lack of pronounced gradation at deep levels, at least within the western batholith.  相似文献   

Late Holocene sea-level changes and isostasy in western Denmark     

W. Roland Gehrels  Katie Szkornik  Jason R. Kirby  William A. Marshall  Jørn B.T. Pedersen 《Quaternary Research》2006,66(2):288-302

Cores and exposed cliff sections in salt marshes around Ho Bugt, a tidal embayment in the northernmost part of the Danish Wadden Sea, were subjected to ¹⁴C dating and litho- and biostratigraphical analyses to reconstruct paleoenvironmental changes and to establish a late Holocene relative sea-level history. Four stages in the late Holocene development of Ho Bugt can be identified: (1) groundwater-table rise and growth of basal peat (from at least 2300 BC to AD 0); (2) salt-marsh formation (0 to AD 250); (3) a freshening phase (AD 250 to AD 1600?), culminating in the drying out of the marshes and producing a distinct black horizon followed by an aeolian phase with sand deposition; and (4) renewed salt-marsh deposition (AD 1600? to present). From 16 calibrated AMS radiocarbon ages on fossil plant fragments and 4 calibrated conventional radiocarbon ages on peat, we reconstructed a local relative sea-level history that shows a steady sea-level rise of 4 m since 4000 cal yr BP. Contrary to suggestions made in the literature, the relative sea-level record of Ho Bugt does not contain a late Holocene highstand. Relative sea-level changes at Ho Bugt are controlled by glacio-isostatic subsidence and can be duplicated by a glacial isostatic adjustment model in which no water is added to the world's oceans after ca. 5000 cal yr BP.  相似文献   

The distribution of radiogenic heat production as a function of depth in the Sierra Nevada Batholith, California   总被引：4，自引：0，他引：4  

Robert J. Brady  Mihai N. Ducea  Steven B. Kidder  Jason B. Saleeby 《Lithos》2006,86(3-4):229-244

Geochemical analyses and geobarometric determinations have been combined to create a depth vs. radiogenic heat production database for the Sierra Nevada batholith, California. This database shows that mean heat production values first increase, then decrease, with increasing depth. Heat production is 2 μW/m³ within the 3-km-thick volcanic pile at the top of the batholith, below which it increases to an average value of 3.5 μW/m³ at 5.5 km depth, then decreases to 0.5–1 μW/m³ at 15 km depth and remains at these values through the entire crust below 15 km. Below the crust, from depths of 40–125 km, the batholith's root and mantle wedge that coevolved beneath the batholith appears to have an average radiogenic heat production rate of 0.14 μW/m³. This is higher than the rates from most published xenolith studies, but reasonable given the presence of crustal components in the arc root assemblages. The pattern of radiogenic heat production interpreted from the depth vs. heat production database is not consistent with the downward-decreasing exponential distribution predicted from modeling of surface heat flow data. The interpreted distribution predicts a reasonable range of geothermal gradients and shows that essentially all of the present day surface heat flow from the Sierra Nevada could be generated within the 35 km thick crust. This requires a very low heat flux from the mantle, which is consistent with a model of cessation of Sierran magmatism during Laramide flat-slab subduction, followed by conductive cooling of the upper mantle for 70 m.y. The heat production variation with depth is principally due to large variations in uranium and thorium concentration; potassium is less variable in concentration within the Sierran crust, and produces relatively little of the heat in high heat production rocks. Because silica content is relatively constant through the upper 30 km of the Sierran batholith, while U, Th, and K concentrations are highly variable, radiogenic heat production does not vary directly with silica content.  相似文献   

Optimization of SAGD Well Elevation     

Jason A. McLennan  Weishan Ren  Oy Leuangthong  C. V. Deutsch 《Natural Resources Research》2006,15(2):119-127

The application of steam-assisted gravity drainage (SAGD) to recover heavy oil sands is becoming increasingly important in the northern Alberta McMurray Formation because of the vast resources/reserves accessible with this mechanism. Selecting the stratigraphic elevations of SAGD well pairs is a vital decision for reservoir evaluation and planning. The inherent uncertainty in the distribution of geological variables significantly influences this decision. Geostatistical simulation is used to capture geological uncertainty, which is used can be transformed into a distribution of the best possible well pair elevations. A simple exhaustive calculation scheme is used to determine the optimum stratigraphic location of a SAGD well pair where the recovery R is maximized. There are three basic steps to the methodology: (1) model the uncertainty in the top continuous bitumen (TCB) and bottom continuous bitumen (BCB) surfaces, (2) calculate the recovery at all possible elevation increments within the TCB and BCB interval, and (3) identify the elevation that maximizes R. This is repeated for multiple TCB/BCB pairs of surfaces to assess uncertainty. The methodology is described and implemented on a subset of data from the Athabasca Oilsands in Fort McMurray, Alberta.  相似文献   

Portable autonomous vertical profiler for estuarine applications   总被引：1，自引：0，他引：1  

Janelle V. Reynolds-Fleming  Jason G. Fleming  Richard A. Luettich 《Estuaries and Coasts》2002,25(1):142-147

The design and implementation of a portable autonomous vertical profiler are documented and example data sets from a mesotidal estuary and a microtidal, wind-driven estuary are presented. The profiler sampling range dynamically adjusts to changes in water column depth, and a typical vertical sampling resolution of 4 cm is attained. Example data show the onset and vertical and temporal extent of stratification in the water column. The profiler is ideal for water quality monitoring programs in shallow estuaries that require frequent profiles of hydrographic, chemical, and biological parameters that can be measured in situ.  相似文献